100W Fin LED Flood light


【1】Product Appearance


【1】Adopting integrated Chip as light source, with high LED initial luminous flux 80-100LM/W , CRI(Ra>70), good heat dissipation, low light degradation.

【2】Aluminum alloy die cast housing, nice appearance, and Durable in quality. heat sink and housing integration together, a integrated housing with efficient cooling and lamp life of up to 50,000 hours;

【3】Using special waterproof connectors and silicon rubber seal technology and protection class IP65;

【4】High purity aluminum reflector, anti-oxidation, unfading in color, reflective effect, The toughened glass panel with high strength protection light source and transmittance rate of 93%;

【5】The whole lamp appearance by paint and sandblasting not only corrosion resistance, but also better products cooling; Stainless steel screws and parts, suitable for harsh environments in the long-term use;

【6】Equipped with respirator to balance lighting outside pressure difference, waterproof and mist cleared to avoid condensation, greatly reducing product failure due to corrosion caused by salt and prolong life;

【7】Heat-pipe Riveting and massive fins cooling technology, by using the 4*Ф6MM heat pipe,the heat generated by the light source quickly transfers to the cooling module of massive radiation fins, efficiently reduce the temperature of the LED light source and extend the lifespan of the lighting source;

【8】Wide supply voltage input 100-240VAC, constant voltage and constant current output, start fast, no flicker, lightning protection and PFC function available;

【2】Shape Structure

Shell Material:Aluminum
Shell Color:Black
Net Weight:4.3Kg
Unit:mm ±1mm

Led flood light Fin 100W cct



Input Voltage AC100~240V Color Rendering Index Ra>70
Frequency Range 50~60Hz Beam Angle 110°
Power Factor >0.91 LED Reduction Rate 1~3% / 1,000Hrs
Power Efficiency >87% Color Temperature 2700~7000K
LED Working Voltage DC30~36V Working Temperature -20℃~+45℃
LED Power 87W IP Grade IP65
Total Power 100W Working Life-span >50000H
Luminous Efficiency ≧80lm / W Power line VDE  3×0.75mm2
Connect wire Brown→L  Blue→N  Yellow or Green→G

【4】Diagram of degradation for Luminous


1.The data above has been got at a temperature of 25 Celsius degree after taking 1000 hours running by a nonstop way.

2.Degradation of luminous flux of LED lamps depends on environmental conditions. The temperature more higher,the working time more longer, the luminous flux will drop more faster.


【7】Packing specification

Packing Dimension:(L370×(W)350×(H)250mm    1PC/CTN  6.5Kg

led flood light fin 150200W baozhuang


【8】Using and installing instructions

led flood light fin 10W anzhuang


1.Only professional electrician can install the lamp, please check the lamp very carefully before installation.

2.Please install the lamp according to the installation procedure, make sure the screw is wrested very tightly, the wires is connected properly.Deatailed installation manual,please check the Product Instructions provided with lamp.



Customer Service


Email to us:
Led street light ht Cold-forging Led high bay Anti-Corrosion led flood light Tag Led flood lamp street light ST Led street light Led high bay (Explosion proof) Tag Led flood light focus Heat pipe Led high bay Pioneer led lights LED street lights Smart Led low bay light Fresh light canopy light Tag Project Cases Anti-Explosion led high bay light Classical high bay light Led flood light 15° Transformers LED street lights E40 Led high bay 2017 LED Tunnel Light Grow Light Led high bay (UFO-3) down light LDM Led street light Led flood light (anti-explosion) TUV Solar LED street lights Faeton Led flood light Tri-proof light AP LED Flood light AC_DOB high bay High Mast Light Led flood light AC DOB SAA Led high bay Linear Led high bay Panel light apple LED Flood light LED Tunnel Light UL RGB led flood light Portable Led flood light Led flood light Fin Driver (UFO high bay) Led high bay (UFO-2) Led high bay (UFO-4) Tag Company News