100W LED flood light

100W LED flood light

Product Appearance

speciality:

1.Adopting integrated Chip as light source with high lighting efficiency 80-100LM/W , high CRI(Ra>70), good quality heat dissipation, low light degradation.
2.Aluminum alloy die cast housing, good strength, high quality heat dissipation. anti corrosion and baking varnish surface, can be for outdoor using.
3.Make a dedicated luminous intensity distribution design via the aluminum reflector, there are two options for lighting distribution, one is for focusing, another is for diffusing.
4.Wide Input Voltage from 100V~240VAC,constant voltage constant current output, can start up at once, no flicker, lightning protection, PFC function available.

Shape Structure

Shell Material:Aluminum Alloy Shell Color:hoar/Black
Net Weight:5.35Kg
Unit:mm ±1mm

1-1

Parameter

Input Voltage AC100~240V Color Rendering Index Ra>70
Frequency Range 50~60Hz Beam Angle 80°
Power Factor >0.97 LED Reduction Rate 1~3% / 1,000Hrs
Power Efficiency >87% Color Temperature 2700~7000K
LED Working Voltage DC30~36V Working Temperature -20℃~+45℃
LED Power 90W IP Grade IP65
Total Power 100W Working Life-span >35000H
Luminous Efficiency 80~100lm / W Power line VDE  3×1.0mm2
Connect wire Brown→L  Blue→N  Yellow or Green→G

 

Diagram of degradation for Luminous

2-2

 

1.The data above has been got at a temperature of 25 Celsius degree and taking 1000 hours running by a nonstop way.

2.Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.

Photomatric Data

3-3

Illumination Distance/illuminance/Irradiated Area

4-4

Packing specification

Packing Dimension:(L)447×(W) 300×(H) 338mm   2PC/CTN   12.7Kg

5-5

Using and installing instructions

1.Installation Procedure

6-6

As Picture No.1 showed,.unscrew the retaining screw, take down the fitting.
As Picture No.2 showed, fix the lamp to mounting surface with 3 screws.
As Picture No.3 showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

2.Mounting Method

7-7

Attentions:

1.Only professional electrician can install the lamp, please check the lamp very carefully before installation.
2.Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.

 

 

 



Driver (UFO high bay) LED street lights Smart apple LED Flood light street light Cold-forging Led high bay 2017 LED Tunnel Light Solar LED street lights UL Led flood light Fin SAA Led high bay Classical high bay light Transformers LED street lights Tri-proof Lamp Led high bay (UFO-3) canopy light RGB led flood light Anti-Corrosion led flood light Led high bay (UFO-2) Tag Project Cases Grow Light Heat pipe Led high bay LDM Led street light TUV Portable Led flood light Tag Led flood light focus AP LED Flood light Led high bay (UFO-4) Linear Led high bay Led high bay (Explosion proof) ST Led street light Led street light ht High Mast Light Tag Company News Panel light Led low bay light Fresh light AC_DOB high bay down light Led flood light 15° Led flood light AC DOB Tri-proof light E40 Led high bay Faeton Led flood light Tag Led flood lamp Led flood light (anti-explosion) LED Tunnel Light Pioneer led lights Anti-Explosion led high bay light