10W RGB led flood light


11  Products Warranty Service regulation

LED flood light applications: Billboard lighting,building exterior landscape lighting,high-pole lighting,road lighting,gardens lighting, etc.

10W RGB Flood light led

【1】Product Appearance


【a】 Adopting integrated Chip as light source,Green light wavelength 520-530nm,Red light wavelength 615-625nm,blue light wavelength460-470nm, good heat dissipation, low light degradation.

【b】Aluminum alloy die cast housing, good strength, high quality heat dissipation. anti corrosion and baking varnish surface, can be for outdoor using.

【c】Make a dedicated luminous intensity distribution design via the aluminum reflector, there are two options for lighting distribution, one is for focusing, another is for diffusing.

【d】Wide Input Voltage from 100V~240VAC,constant voltage constant current output, can start up at once, no flicker, lightning protection, PFC function available.


【2】 Shape Structure

Shell Material: Aluminum Alloy

Shell Color: hoar/ Black


【3】 Parameter

Input Voltage


The light source wavelength Red 7.8 W
Green, 12.5 W
Blue 13.6 W


Beam Angle


LED Working Voltage


Working Temperature


LED Power Red 4.8 W
Green, 4.61 W
Blue 4.47 W
IP Grade


Total Power


Working Life-span


LED Reduction Rate

1~3% / 1,000Hrs

Power line

VDE  3×0.75mm2

Connect wire

Brown →L / Blue→ N/Yellow or Green →G


【5】Packing specification


【6】Instructions on the use of the remote control:



【7】FAQs Approach:

Failure Phenomenon Analysis Solution
LED unworkable Wrong Wiring reconnecting the power line
LED Broken Change LED
Driver problem Repair or change driver
Wrong driver connecting Rewire
LED lights flickering The input voltage is not in the specified range (AC100-240V 50/60Hz)/Input the correct working voltage 100~240VAC,50~60Hz
Driver problem Repair or change driver


【8】 Notes for using and maintenance

1.Due to work for a long time, the surface will unavoidable attach some dust and debris, it will directly influence the radiating and lighting effect of the lamp, regular maintenance is necessary, generally the  maintenance cycle is 8 to 12 months;

2.During the process of maintenance, please check if all the parts are in good condition, whether there are loose screws or not, if so, please twist it tightly in time and if there are damaged parts, please replace them for normal use soon;

3.If the surface is treated with a sum of a dust and debris, please make cleaning by proper tool, keep clean of lens in particular, if there is dust attached, to avoid the bad impact on the lighting effect due to the scratch or chemical reaction of the lens, please do not use corrosive or volatile liquid to do the cleaning job, clean water or special cleaning agent is recommended.

4.If there is unworkable or flickering LED lights, crack or damaged on the lens, please contact with the supplier directly if you are not sure for your repairing job.

Led high bay (Explosion proof) Cold-forging Led high bay Pioneer led lights Led high bay (UFO-4) Led low bay light Fresh light Led flood light (anti-explosion) ST Led street light 2017 LED Tunnel Light Faeton Led flood light AP LED Flood light Linear Led high bay Classical high bay light Heat pipe Led high bay High Mast Light Tag Project Cases AC_DOB high bay Tag Led flood light focus Led flood light Fin Led flood light AC DOB Portable Led flood light LED street lights Smart Anti-Explosion led high bay light UL Tri-proof light LDM Led street light Led flood light 15° down light Tri-proof Lamp apple LED Flood light Led high bay (UFO-3) Panel light Grow Light LED Tunnel Light Driver (UFO high bay) Led high bay (UFO-2) Led street light ht E40 Led high bay Solar LED street lights street light RGB led flood light Tag Company News TUV Tag Led flood lamp SAA Led high bay canopy light Anti-Corrosion led flood light Transformers LED street lights