150W LED High Bay Light 120°



150W LED High Bay Light 120°


1.Adopting Epistar / Bridgelux integrated Chip as light source with high lighting efficiency, LED initial luminous flux 80-100LM/W ,high CRI, low light degradation.

2.There is build-in dedicated power supply, input voltage: AC100~240V,Power Efficiency:>87%,Power Factor:>0.97,constant voltage, constant current. Over voltage \ over power \ over current protection, lighting protection.

3.Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 65,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.

4.Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.



150W LED High Bay Light 120°

【2】Shape Structure
Shell Material:Aluminum Alloy
Shell Color:Shell Color:



150W LED High Bay Light 120°


Input Voltage AC100~240V Color Rendering Index Ra>70
Frequency Range 50~60Hz Beam Angle 120 °
Power Factor >0.97 LED Reduction Rate 1~3% / 1,000Hrs
Power Efficiency >87% Color Temperature 2700~7000K
LED Working Voltage DC30~36V Working Temperature -20℃~+45℃
LED Power 146W IP Grade IP62
Total Power 150W Working Life-span >50000H
Luminous Efficiency ≧80lm / W Power line VDE 3×1.0mm2
Connect wires Brown→L,Blue→N ,Yellow or Green→G


150W LED High Bay Light 120°

【4】Packing specification



150W LED High Bay Light 120°

【5】Using and installing instructions


Installation Procedure

As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly

As Picture No.2 Showed, Wrest hanger into top cap

As Picture No.3 Showed, Wrest the non skid lock screw to proper position.

As Picture No.4 Showed, Hang the lamp on the installation site

As Picture No.5 Showed, Hang chaining of steel wire on another installation device.

As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.



150W LED High Bay Light 120°


Only professional electrician can install the lamp, please check the lamp very carefully before installation

Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.


LED street lights Smart Grow Light Led flood light 15° Led high bay (UFO-3) Driver (UFO high bay) Portable Led flood light Classical high bay light 2017 LED Tunnel Light Tag Led flood lamp Heat pipe Led high bay Anti-Corrosion led flood light LDM Led street light Tri-proof Lamp ST Led street light UL Solar LED street lights down light Tag Company News Tri-proof light SAA Led high bay Led flood light (anti-explosion) E40 Led high bay AP LED Flood light Led low bay light Fresh light Tag Project Cases Faeton Led flood light Led high bay (UFO-4) Led street light ht AC_DOB high bay Led high bay (UFO-2) Pioneer led lights Transformers LED street lights apple LED Flood light Led flood light Fin street light RGB led flood light TUV Led high bay (Explosion proof) Led flood light AC DOB Linear Led high bay High Mast Light Anti-Explosion led high bay light Tag Led flood light focus Panel light Cold-forging Led high bay LED Tunnel Light canopy light