150W LED High Bay Light 40°

150-200-high-bay-40-1
150-200-high-bay-40-2

 

150W LED High Bay Light 40°

【1】Speciality

1.Adopting Epistar / Bridgelux integrated Chip as light source with high lighting efficiency, LED initial luminous flux 80-100LM/W ,high CRI, low light degradation.

2.There is build-in dedicated power supply, input voltage: AC100~240V,Power Efficiency:>87%,Power Factor:>0.97,constant voltage, constant current. Over voltage \ over power \ over current protection, lighting protection.

3.Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 65,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.

4.Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.

 

 

150W LED High Bay Light 40°

【2】Shape Structure
Shell Material:Aluminum Alloy
Shell Color:Shell Color:

150W-high-bay-400

 

150W LED High Bay Light 40°

【3】Parameter

Input Voltage AC100~240V Color Rendering Index Ra>70
Frequency Range 50~60Hz Beam Angle 40 °
Power Factor >0.97 LED Reduction Rate 1~3% / 1,000Hrs
Power Efficiency >87% Color Temperature 2700~7000K
LED Working Voltage DC30~36V Working Temperature -20℃~+45℃
LED Power 146W IP Grade IP62
Total Power 150W Working Life-span >50000H
Luminous Efficiency ≧80lm / W Power line VDE 3×1.0mm2
Connect wires Brown→L,Blue→N ,Yellow or Green→G

 

150W LED High Bay Light 40°

【4】Packing specification

baozhuang200-150

 

150W LED High Bay Light 40°

【5】Using and installing instructions

anzhuang2

Installation Procedure

As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly

As Picture No.2 Showed, Wrest hanger into top cap

As Picture No.3 Showed, Wrest the non skid lock screw to proper position.

As Picture No.4 Showed, Hang the lamp on the installation site

As Picture No.5 Showed, Hang chaining of steel wire on another installation device.

As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

 

 

150W LED High Bay Light 40°

【6】Attentions:

Only professional electrician can install the lamp, please check the lamp very carefully before installation

Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.

 


Tags:
Cold-forging Led high bay E40 Led high bay High Mast Light LED street lights Smart Solar LED street lights Led street light ht Led flood light Fin Grow Light Panel light Driver (UFO high bay) Tri-proof light Anti-Corrosion led flood light Anti-Explosion led high bay light Led low bay light Fresh light AC_DOB high bay Led high bay (Explosion proof) 2017 LED Tunnel Light Linear Led high bay street light Led flood light 15° Led flood light (anti-explosion) Heat pipe Led high bay down light LDM Led street light UL Led flood light AC DOB RGB led flood light Tri-proof Lamp Faeton Led flood light AP LED Flood light Pioneer led lights Transformers LED street lights Tag Led flood light focus Led high bay (UFO-3) Classical high bay light Portable Led flood light ST Led street light SAA Led high bay TUV canopy light Tag Project Cases Tag Led flood lamp apple LED Flood light Led high bay (UFO-2) LED Tunnel Light Tag Company News Led high bay (UFO-4)