200W LED High Bay Light 120°



200W LED High Bay Light 120°


1.Adopting Epistar / Bridgelux integrated Chip as light source with high lighting efficiency, LED initial luminous flux 80-100LM/W ,high CRI, low light degradation.

2.There is build-in dedicated power supply, input voltage: AC100~240V,Power Efficiency:>87%,Power Factor:>0.97,constant voltage, constant current. Over voltage \ over power \ over current protection, lighting protection.

3.Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 65,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.

4.Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.



200W LED High Bay Light 120°

【2】Shape Structure
Shell Material:Aluminum Alloy
Shell Color:Shell Color:



200W LED High Bay Light 120°


Input Voltage AC100~240V Color Rendering Index Ra>70
Frequency Range 50~60Hz Beam Angle 120 °
Power Factor >0.97 LED Reduction Rate 1~3% / 1,000Hrs
Power Efficiency >87% Color Temperature 2700~7000K
LED Working Voltage DC30~36V Working Temperature -20℃~+45℃
LED Power 195W IP Grade IP62
Total Power 200W Working Life-span >50000H
Luminous Efficiency ≧80lm / W Power line VDE 3×1.0mm2
Connect wires Brown→L,Blue→N ,Yellow or Green→G


200W LED High Bay Light 120°

【4】Packing specification



200W LED High Bay Light 120°

【5】Using and installing instructions


Installation Procedure

As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly

As Picture No.2 Showed, Wrest hanger into top cap

As Picture No.3 Showed, Wrest the non skid lock screw to proper position.

As Picture No.4 Showed, Hang the lamp on the installation site

As Picture No.5 Showed, Hang chaining of steel wire on another installation device.

As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.



200W LED High Bay Light 120°


Only professional electrician can install the lamp, please check the lamp very carefully before installation

Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.


Solar LED street lights Tri-proof light Anti-Explosion led high bay light Tag Company News Led low bay light Fresh light apple LED Flood light Transformers LED street lights ST Led street light Heat pipe Led high bay Led flood light (anti-explosion) LED Tunnel Light Portable Led flood light canopy light Pioneer led lights Tri-proof Lamp UL Cold-forging Led high bay LED street lights Smart Led high bay (Explosion proof) Led street light ht Led high bay (UFO-2) TUV Faeton Led flood light High Mast Light Classical high bay light Led flood light 15° Panel light down light Led high bay (UFO-4) LDM Led street light Grow Light E40 Led high bay Linear Led high bay Driver (UFO high bay) Led high bay (UFO-3) AC_DOB high bay Tag Led flood lamp Tag Project Cases Led flood light Fin Led flood light AC DOB 2017 LED Tunnel Light RGB led flood light Tag Led flood light focus SAA Led high bay street light AP LED Flood light Anti-Corrosion led flood light