Sophia Home > Led high bay light (Classical) > 200W LED High Bay Light 40°
200W LED High Bay Light 40°
【1】Speciality
1.Adopting Epistar / Bridgelux integrated Chip as light source with high lighting efficiency, LED initial luminous flux 80-100LM/W ,high CRI, low light degradation.
2.There is build-in dedicated power supply, input voltage: AC100~240V,Power Efficiency:>87%,Power Factor:>0.97,constant voltage, constant current. Over voltage \ over power \ over current protection, lighting protection.
3.Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 65,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.
4.Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.
200W LED High Bay Light 40°
【2】Shape Structure
Shell Material：Aluminum Alloy
Shell Color：Shell Color：
200W LED High Bay Light 40°
【3】Parameter
| Input Voltage | AC100～240V | Color Rendering Index | Ra＞70 |
| Frequency Range | 50～60Hz | Beam Angle | 40 ° |
| Power Factor | >0.97 | LED Reduction Rate | 1～3% / 1,000Hrs |
| Power Efficiency | >87% | Color Temperature | 2700～7000K |
| LED Working Voltage | DC30～36V | Working Temperature | -20℃～+45℃ |
| LED Power | 195W | IP Grade | IP62 |
| Total Power | 200W | Working Life-span | >50000H |
| Luminous Efficiency | ≧80lm / W | Power line | VDE 3×1.0mm2 |
| Connect wires | Brown→L，Blue→N ，Yellow or Green→G | ||
200W LED High Bay Light 40°
【4】Packing specification
200W LED High Bay Light 40°
【5】Using and installing instructions
Installation Procedure
As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly
As Picture No.2 Showed, Wrest hanger into top cap
As Picture No.3 Showed, Wrest the non skid lock screw to proper position.
As Picture No.4 Showed, Hang the lamp on the installation site
As Picture No.5 Showed, Hang chaining of steel wire on another installation device.
As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.
200W LED High Bay Light 40°
【6】Attentions：
Only professional electrician can install the lamp, please check the lamp very carefully before installation
Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.
Tags: Classical high bay light