300W LED High Bay Light 60°



300W LED High Bay Light 60°


1.Liu then uses heat pipe technology, the heat pipe and heat sink close riveting, the heat generated by the light source through the efficient heat pipe heat conduction to the modular body temperature quickly lower light, extend lamp life

2.Professional thermal structure design, perfect shape and implied cooling module air duct, inside and outside transparent, and fins up and down to form the 3D cooling duct, the maximum degree distribution of heat

3.Small integral built-in power space, more harmonious and beautiful whole lamp

4.High purity aluminum reflector anodized and polished performance while optimizing lighting will minimize glare. 60 ° 90 ° 110 °, such as multi-angle options to meet professional with light, adapt to different occasions

5.Using Cree LED, with high LED initial luminous flux >100LM/W, and CRI Ra>80.

6.Professional design, light body compact, attractive appearance, simple assembly



300W LED High Bay Light 60°

【2】Shape Structure
Shell Material:Aluminum Alloy
Shell Color:Silver grey

300W high bay 2 60-2



300W LED High Bay Light 60°


Input Voltage AC100~240V Color Rendering Index Ra>80
Frequency Range 50~60Hz Beam Angle 110° / 90 °
Power Factor >0.95 LED Reduction Rate 1~3% / 1,000Hrs
Power Efficiency >90% Color Temperature 3000K/4000K/ 5000K
LED Working Voltage DC36~42V Working Temperature -20℃~+45℃
LED Power 288W IP Grade IP20
Total Power 300W Working Life-span >50000H
Luminous Efficiency ≧100lm / W Power line VDE 3×1.5mm2 /(UL 18AWG)
Connect wires Brown→L,Blue→N ,Yellow or Green→G



300W LED High Bay Light 60°

【4】Packing specification




300W LED High Bay Light 60°

【5】Using and installation instructions

Installation Procedures


1.Please firstly install the reflector properly on the heat sink, and screw down.

2.Hang the body lamp on the installation site.

3.Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.



300W LED High Bay Light 60°


1.A licensed electrician must undertake this installation. Please check the lamp carefully before installation.

2.Please follow up the installation procedures, make sure the screws been wrested very tightly, the wires been connected properly, as attached installation instruction.

Anti-Corrosion led flood light canopy light apple LED Flood light Tri-proof Lamp AC_DOB high bay Linear Led high bay Transformers LED street lights Grow Light High Mast Light Anti-Explosion led high bay light Pioneer led lights UL down light Led high bay (UFO-2) Led low bay light Fresh light AP LED Flood light LED street lights Smart Tri-proof light SAA Led high bay Tag Company News E40 Led high bay Led street light ht Faeton Led flood light LED Tunnel Light LDM Led street light Led flood light 15° Led flood light AC DOB Led flood light Fin Panel light Led high bay (Explosion proof) Portable Led flood light TUV Led flood light (anti-explosion) RGB led flood light Tag Led flood light focus street light Tag Led flood lamp ST Led street light Heat pipe Led high bay 2017 LED Tunnel Light Led high bay (UFO-3) Solar LED street lights Driver (UFO high bay) Cold-forging Led high bay Led high bay (UFO-4) Classical high bay light Tag Project Cases