Home > Led flood light (Fin series) > 30W Fin LED Flood light
【1】Adopting integrated Chip as light source, with high LED initial luminous flux 80-100LM/W , CRI(Ra>70), good heat dissipation, low light degradation.
【2】Aluminum alloy die cast housing, nice appearance, and Durable in quality. heat sink and housing integration together, a integrated housing with efficient cooling and lamp life of up to 50,000 hours;
【3】Using special waterproof connectors and silicon rubber seal technology and protection class IP65;
【4】High purity aluminum reflector, anti-oxidation, unfading in color, reflective effect, The toughened glass panel with high strength protection light source and transmittance rate of 93%;
【5】The whole lamp appearance by paint and sandblasting not only corrosion resistance, but also better products cooling; Stainless steel screws and parts, suitable for harsh environments in the long-term use;
【6】Equipped with respirator to balance lighting outside pressure difference, waterproof and mist cleared to avoid condensation, greatly reducing product failure due to corrosion caused by salt and prolong life;
【7】Heat-pipe Riveting and massive fins cooling technology, by using the 4*Ф6MM heat pipe,the heat generated by the light source quickly transfers to the cooling module of massive radiation fins, efficiently reduce the temperature of the LED light source and extend the lifespan of the lighting source;
【8】Wide supply voltage input 100-240VAC, constant voltage and constant current output, start fast, no flicker, lightning protection and PFC function available;
|Input Voltage||AC100～240V||Color Rendering Index||Ra＞70|
|Frequency Range||50～60Hz||Beam Angle||110°|
|Power Factor||>0.90||LED Reduction Rate||1～3% / 1,000Hrs|
|Power Efficiency||>87%||Color Temperature||2700～7000K|
|LED Working Voltage||DC30～34V||Working Temperature||-20℃～+45℃|
|LED Power||26W||IP Grade||IP65|
|Total Power||30W||Working Life-span||>50000H|
|Luminous Efficiency||≧80lm / W||Power line||VDE 3×0.75mm2|
|Connect wire||Brown→L Blue→N Yellow or Green→G|
【4】Diagram of degradation for Luminous
1.The data above has been got at a temperature of 25 Celsius degree after taking 1000 hours running by a nonstop way.
2.Degradation of luminous flux of LED lamps depends on environmental conditions. The temperature more higher,the working time more longer, the luminous flux will drop more faster.
Packing Dimension：415×(W)360×(H) 270mm 20PC/CTN 20Kg
【8】Using and installing instructions
1.Only professional electrician can install the lamp, please check the lamp very carefully before installation.
2.Please install the lamp according to the installation procedure, make sure the screw is wrested very tightly, the wires is connected properly.Deatailed installation manual,please check the Product Instructions provided with lamp.
Tags: Led flood light Fin