80W LED High Bay Light 40°

high bay-1

11  Products Warranty Service regulation

LED high bay lights applications: Factories,workshops,warehouses,exhibition centers,shopping malls or supermarkets,stadiums,toll stations, etc.

80W LED High Bay Light 40°

【1】Specialty:

【A】Adopting Epistar / Bridgelux integrated Chip as light source with high lighting efficiency, LED initial luminous flux 80-100LM/W,high CRI, low light degradation.

【B】There is build-in dedicated power supply, input voltage: AC100~240V,Power Efficiency:>87%,Power Factor:>0.97,constant voltage, constant current. Over voltage \ over power \ over current protection, lighting protection.

【C】Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 62,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.
【D】Can start up within 1`3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly.

 

【2】 Shape Structure

Shell Material: Aluminum Alloy

Shell Color: Black

Weight:  5.45Kg

 【3】Parameter

Input Voltage

AC100~277V

AC200~480V For 

North America

Color Rendering Index

Ra>70

Freqency Range

50~60Hz

Beam Angle

40°

Power Factor

>0.97

LED Reduction Rate

1~3% / 1,000Hrs

Power Efficiency

>87%

Color Temperature

2700~7000K

ED Working Voltage

DC30~36V

Working Temperature

-20℃~+45℃

LED Power

80W

IP Grade

IP62

Total Power

85W

Working Life-span

>35000H

Luminous Efficiency

80~100lm / W

Power line

VDE  3×1.0mm2

Connect wire

Brown→L  Blue→N   Yellow or Green→G

 

【6】Illumination Distance/illuminance/Irradiated Area

 

【7】Using and installing instructions

Installation Procedure

install-1

install-2

As Picture No.1 Showed,Install Reflector on the heat sink,wrest fixed screws very tightly.

As Picture No.2 Showed,Wrest hanger into top cap.

As No.3 Showed,Wrest the non skid lock screw to proper position.

As No.4 Showed,Hang the lamp on the installation site.

As Picture No.5 showed,Hang chaining of steel wire on another installation device.

As Picture No.6 Showed,connect Live Wire/Null Wire/Ground Wire to electric cable and switch on.

 


Tags:
canopy light RGB led flood light Led high bay (UFO-3) Led high bay (UFO-2) LDM Led street light Panel light Transformers LED street lights Led high bay (Explosion proof) Led flood light Fin Tri-proof Lamp Tag Company News Tag Project Cases Led flood light 15° LED Tunnel Light Pioneer led lights Tag Led flood light focus E40 Led high bay down light Classical high bay light SAA Led high bay LED street lights Smart UL Led high bay (UFO-4) Grow Light AC_DOB high bay Faeton Led flood light Led flood light (anti-explosion) High Mast Light 2017 LED Tunnel Light Led flood light AC DOB Led low bay light Fresh light TUV Led street light ht Solar LED street lights ST Led street light Anti-Explosion led high bay light apple LED Flood light Driver (UFO high bay) Tag Led flood lamp Portable Led flood light Cold-forging Led high bay Linear Led high bay Heat pipe Led high bay Anti-Corrosion led flood light AP LED Flood light Tri-proof light street light