Home > Led high bay (UFO-Ⅱ) > UFO-2 LED high bay light (Philips LED) 150W
1. Patented appearance design, Fins heating dissipation design enables the LED Tj within 85℃,
and power up to 200W, lifespan more than 50,000 hours.
2. Using Philips 3030 LED, the lamp’s luminous efficiency can reach 110~125LM/W, and CRI>80Ra.
3. This lamp is pretty and dustproof, with protecting rate:IP65.
4. The high efficiency power supply had passed UL,TUV,SAA certificates with input voltage 90-305VAC.
Shell Material：Aluminum Alloy
|Input Voltage||AC90-305V||Color Rendering Index||Ra＞80|
|Frequency Range||50～60Hz||Beam Angle||110°|
|Power Factor||>0.97||LED Reduction Rate||1～3% / 1,000Hrs|
|Power Efficiency||>93%||Color Temperature||2700～6500K|
|LED Working Voltage||DC40～48V||Working Temperature||-30℃～+45℃|
|LED Power||140W||IP Grade||IP65|
|Total Power||150W||Working Life-span||>50000H|
|Luminous Efficiency||110-125lm / W||Power line||VDE 3×1.0mm2|
|Connect wires||Brown→L Blue→N Yellow or Green→G|
Illumination Distance/illuminance/Irradiated Area
Using and installation instructions
The wire is made of flame retardant cable which reaching 90VO grade. Wire in blue (AC input
wire), brown, (AC input wire) and lime-green( earth wire).
1. In case of fire, explosion, electronic shock, the install, inspect and maintenance
must be operated by professional people.
2. Please make sure the power off before operation ！Luminaries must be electronic
3. Please make the voltage supplied is available for the luminaries ！
4. Please make the luminaries working under the limited working temperature ！
5. In order to guarantee enough air convection, luminaries should not be installed
in narrow space ！
Lamp must be vertical suspension and the supporter should can bear at least 3 times weight of
the lamp. Luminaires
should not be installed where it is draught, in case of shaking and unstable.
Tags: Led high bay (UFO-2)