Sophia Home > T5 Tube Grow Light > LED High Mast light 200W
Speciality：
1.Adopting Philips SMD3030 as light source, uniform light,LED initial luminous flux 100LM/W , CRI
(Ra>80), good heat dissipation, low light degradation.
2.Heatpipe-Riveting and massive fins cooling technology
The 4*Ф6MM heatpipe directly connect light source,quickly transfer the LED’s heat to the
massive cooling radiation fin; Massive fins tightly connect to the die-cast heat sink,
constitute a integrated cooling housing. The finished LED light’s lifespan is 50,000 hours
reasonable.
3.Adopting MEANWELL Driver,wide Input Voltage from 90V~305VAC,constant voltage constant
currentoutput, can start up at once, no flicker, lightning protection, PFC function available.
4.Adopting pure aluminum reflector,anti-oxidation process,unfading in color, good reflection.
Using toughened glass panel,strongly protects the light source,transmittance rate is up to 93%.
5.Whole light processed by oxide sandblasting paint, excellent corrosion resistance ability.
Using stainless steel screws and spare parts, can be used in all kinds of harsh conditions for
long term.
6.Equipped with respirator,balance the different pressure between the atmosphere and the shell.
It is water proof also defog and avoiding the drop condensation. It significantly reduces
product failure rate caused by corrosion and so extends the product lifespan.
7.Adopting water-proof connector and silicon rubber sealing, the protection rate is IP65
Shape Structure
Shell Material: Aluminum Alloy
Shell Color: Black
Net Weight: 6.9Kg
Parameter
| Input Voltage | AC90～305V | Color Rendering Index | Ra＞80 |
| Frequency Range | 50～60Hz | Beam Angle | 25°45°90° |
| Power Factor | >0.96 | LED Reduction Rate | 1～3% / 1,000Hrs |
| Power Efficiency | >95% | Color Temperature | 4000-6500K |
| LED Working Voltage | DC40～48V | Working Temperature | -20℃～+45℃ |
| LED Power | 190W | IP Grade | IP65 |
| Total Power | 200W | Working Life-span | >50000H |
| Luminous Efficiency | ≧100lm / W | Power line | VDE 3×1.0mm2 |
| Connect wire | Brown→L Blue→N Yellow or Green→G | ||
Photometric Data
Illumination Distance/illuminance/Irradiated Area
Attentions：
1.Only professional electrician can install the lamp, please check the lamp very carefully before installation.
2.Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly,
the wires have been connected properly, .Please operate according to Product Instructions enclosed.
Tags: High Mast Light