LED high bay lights

Speciality：

1.Adopting CREE 3535 as light source, uniform light,LED initial luminous flux 100LM/W , CRI
(Ra>80), good heat dissipation, low light degradation.

2.Heatpipe-Riveting and massive fins cooling technology
The 4*Ф6MM heatpipe directly connect light source,quickly transfer the LED’s heat to the
massive cooling radiation fin; Massive fins tightly connect to the die-cast heat sink,
constitute a integrated cooling housing. The finished LED light’s lifespan is 50,000 hours
reasonable.

3.Adopting MEANWELL Driver,wide Input Voltage from 90V~305VAC,constant voltage constant
currentoutput, can start up at once, no flicker, lightning protection, PFC function available.

4.Adopting pure aluminum reflector,anti-oxidation process,unfading in color, good reflection.
Using toughened glass panel,strongly protects the light source,transmittance rate is up to 93%.

5.Whole light processed by oxide sandblasting paint, excellent corrosion resistance ability.
Using stainless steel screws and spare parts, can be used in all kinds of harsh conditions for
long term.

6.Equipped with respirator,balance the different pressure between the atmosphere and the shell.
It is water proof also defog and avoiding the drop condensation. It significantly reduces
product failure rate caused by corrosion and so extends the product lifespan.

7.Adopting water-proof connector and silicon rubber sealing, the protection rate is IP65

 

Shape Structure

Shell Material: Aluminum Alloy
Shell Color: Black
Net Weight: 13Kg

 

Parameter

Input Voltage	AC90～305V	Color Rendering Index	Ra＞80
Frequency Range	50～60Hz	Beam Angle	25°45°90°
Power Factor	>0.96	LED Reduction Rate	1～3% / 1,000Hrs
Power Efficiency	>95%	Color Temperature	4000-6500K
LED Working Voltage	DC40～48V	Working Temperature	-20℃～+45℃
LED Power	475W	IP Grade	IP65
Total Power	500W	Working Life-span	>50000H
Luminous Efficiency	≧100lm / W	Power line	VDE  3×1.0mm2
Connect wire	Brown→L  Blue→N   Yellow or Green→G

 

Photometric Data

 

Illumination Distance/illuminance/Irradiated Area

Attentions：

1.Only professional electrician can install the lamp, please check the lamp very carefully before installation.

2.Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly,
the wires have been connected properly, .Please operate according to Product Instructions enclosed.

Tags: High Mast Light