LED high bay lights

Speciality

	1. Adopting Cree original LED, luminaire efficency>100lm/w, CRI>80Ra. Meanwell driver, Input voltage: 90－305VAC;
	2. Graceful Stream-line design, suitable for high pole installation, which is not affected by wind. ADC12 Aluminum alloy die casting shell, good mechanical strength and heat dissipation.
	3. Compact water-proof structure design, protection grade up to IP65
	4. Use of lens for light distribution processing, different beam angle 140×75°, more effective use the light.
	5.Finished product can vary the light Angle, using stents adjustment point, Angle adjustable plus or minus 60° ,25° plus or minus
	6. Adopting special thermal conductive materials from South Korea, which can fast conduct the heat from the light source to the shell, temperature gap is less than 8 degree. There is a circular air convection channel inside of the lighting fixture, making it more effective heat dissipation.

 

Shape Structure

Shell Material：ADC12 Aluminum Alloy
Shell Color：Black
Net Weight：4Kg
Unit：mm ±1mm

 

Parameter

Input Voltage	AC90～305V	Color Rendering Index	Ra＞80
FrequencyRange	50～60Hz	Beam Angle	140×75°
Power Factor	>0.95	LED Reduction Rate	1～3% / 1,000Hrs
Power Efficiency	>90%	Color Temperature	3000K,4000K,5000K
LED Working Voltage	DC37～42V	Working Temperature	-20℃～+45℃
LED Power	45W	IP Grade	IP65
Total Power	50W	Working Life-span	>50000H
Luminous Efficiency	100 lm / W	Power line	VDE 3×0.75mm2
Connect wire	Brown →L / Blue→ N/Yellow or Green →G

 

 

Using and installing instructions

As Picture No.1 showed, fix the lamp to mounting surface with 3 screws.

As Picture No.2 showed, unscrew the retaining screw, take down the fitting.

As Picture No.3 showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.

Attentions：

Only professional electrician can install the lamp, please check the lamp very carefully before installation.

Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.