LED high bay lights

	Products Warranty Service regulation
	WF2 Anti-corrosion test report

LED flood light applications:  Vessel, ship-side and other offshore lighting area,;ordinary electroplate factory, oxygen factory, painting factory, and smelting factory etc. with slightly corrosion gas and other environment place.

50W Led Floodlights  Anti-Corrosion

【1】Product Appearance

1.Adopting integrated Chip as light source with high lighting efficiency 80-100LM/W, high CRI(Ra>70), high quality heat dissipation, low light degradation.

2.High thermal conductivity aluminum alloy die casting shell, good mechanical strength, good heat dissipation performance, surface anti-corrosion coating processing, anti-corrosion grade WF2, can be used indoor and outdoor prevent corrosion environment.

3.Wide Input Voltage from 100V~240VAC, constant voltage and current output, can start up at once, no flicker, lightning protection, PFC function available.

4. This product main application: Vessel, ship-side and other offshore lighting area,;ordinary electroplate factory, oxygen factory, painting factory, and smelting factory etc. with slightly corrosion gas and other environment place.

【2】Shape Structure

Shell Material：Aluminum

Shell Color：Black

Net Weight：0.6Kg

Unit：mm  ±1mm

 

【3】 Anti-Corrosion parameters

3.1 Environment Introduction

3.1.1 Environment Condition(Symbol Introduce)

K	Z	B	C	S
climate conditions	special climate conditions	biotic condition	Chemical active material conditions	Mechanical active material conditions

3.1.2 Special climate condition

Zh	Za	Zw
thermal radiation	Surrounding air movement	water except rain

3.1.3 Chemical active material conditions

C2	C3	C4
Slightly corrosion condition	Medium corrosion conditions	Strong corrosion conditions

3.2 Anti-Corrosion Grade

F1	F2	W	WFI	WF2
Indoor anti medium corrosion type	Indoor anti strong corrosion type	Outdoor anti slightly corrosion type	Outdoor anti medium corrosion type	Outdoor anti strong corrosion type

3.3 All kinds of anti-corrosion electrical use environment condition grade reference table

Anti-Corrosion Grade	Use environment condition level
F1	3K5L1)／3Zh1／3Za5／3Zw9／3B2／3C3／3S3
F2	3K5L1)／3Zh1／3Za5／3Zw9／3B2／3C3／3S3
W	4K12)／4Zh1／4Za4／4Zw7／4B1／4C2／4S2
WF1	4K12)／4Zh1／4Za4／4Zw7／4B1／4C3／4S3
WF2	4K12)／4Zh1／4Za4／4Zw7／4B1／4C4／4S4
1.The letter “L” means part of the parameter is a little lower than the original level. 2.When user propose below 25℃ temperature, should apply 4K2 level instead of 4K1 level.

3.4 Our anti-corrosion LED flood light belong to “WF2”level, details as above.
3.5 Weak corrosive gas specification:

Gas Type	Substance name	Content（mg/m3）
B	CO2	＞2000
	SO2	0.5～10
	HF	0.01～5
	H2S	0.01～5
	NOx	0.1～5
	Cl	0.1～1
	HCl	0.05～5

【4】Parameter

Input Voltage	AC100～240V	Color Rendering Index	Ra＞70
Frequency Range	50～60Hz	Beam Angle	100°
Power Factor	>0.97	LED Reduction Rate	1～3% / 1,000Hrs
Power Efficiency	>87%	Color Temperature	2700～7000K
Working Voltage	DC30～36V	Working Temperature	-20℃～+45℃
LED Power	50W	IP Grade	IP65
Total Power	57W	Working Life-span	>35000H
Luminous Efficiency	80～100lm / W	Power line	VDE  3×0.75mm2
Connect wire	Brown→L   Blue→N   Yellow or Green→G

【7】Illumination Distance/Illuminance/Irradiated Area

【8】Packing specification

1、Packing Dimension：（L）654×(W) 384×(H) 304mm   4PC/CTN   17Kg

 

 

【9】Mounting Method

1. Only professional electrician can install the lamp, please check the lamp very carefully before installation.

2. Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly,
the wires have been connected properly, .Please operates according to Product Instructions enclosed.

Tags: Anti-Corrosion led flood light